HP ProCurve 8100fl Series Installation And Getting Started Manual page 20

Introducing the ProCurve Series 8100fl Switch
Front of the Switch
Table 1-5.
The 10-Port mini-GBIC Module shows the activity status of each port on top
and has an LED showing the link status of each port on the bottom.
10-Port mini-GBIC Module
Activity and
Link LEDs
(per port)
Ports 1-4
Ports 5-8
Ports 9-10
Status LED
N o t e
The 10-Port mini-GBIC Module supports various ProCurve mini-GBICs. Refer
to the ProCurve Switch fl Modules Installation Guide for further details.
1-10
10-Port mini-GBIC Module (J8735A) LEDs
LED Color State
Activity Green Flashing
(per port)
Green Solid
Off Flashing
Link Green Solid
(per port)
n/a Off
Status n/a Off
Green Flashing
Green Solid
Yellow/ Flashing
Orange
Meaning
Transmitting data.
Link is up; no data is being transferred.
When no connector is plugged into the
port, the LED will flash approximately
once every four seconds. This is a safety
feature known as Auto Laser Shutdown
Link is up.
No connector is plugged into the port.
No power to the module.
Module is powering up and downloading
operating software.
Software image loaded successfully.
Self-test failure.