Table of Contents
Advertisement
Installing the ProCurve Switch 8100fl
Installation Procedures
Installation Procedures
W A R N I N G
To avoid personal injury or product damage, read the safety warnings
and installation precautions on
guidelines on
8100fl unaided.
Summary
Follow these steps to install your switch. Details for each of the steps
highlighted below are provided in the rest of the chapter.
1. Preparing the installation site
2. Mounting the chassis
3. Installing fan trays
4. Installing modules
5. Installing power supplies
2-4
page
2-9. Never attempt to mount a ProCurve Switch
environment into which you will be installing the switch is properly
prepared, including having the correct network cabling ready to connect
to the switch, and establishing a good location for the switch.
in a standard 19-inch equipment rack. To avoid personal injury, reduce the
weight of the chassis by removing all hardware components, (such as all
module blanks, power supplies, fan trays, and so on) from the chassis
before moving and installing it in a rack.
(page
two fan trays to provide cooling for the switch. The fan tray assembly is
located above the power supply, just below the vertical module slots.
(page
ProCurve Switch 8100fl: fabric, management, and interface modules.
You must install at least one switch fabric module and one management
module to operate the switch. In addition, the interface modules provide
various network connectivity options (see the ProCurve Switch fl
Modules Installation Guide for details):
•
The X2 10-GbE modules (J8736A and J8737A) require that you install
a transceiver (see
page
•
The 10-Port mini-GBIC module requires that you install mini-GBICs
(see
page
4-15).
slots in the Switch 8108fl and Switch 8116fl. The Switch 8108fl is shipped
with one AC power supply; the Switch 8116fl is shipped with two AC
power supplies.
page 2-5
and follow the rack mounting
(page
2-7). Make sure that the physical
(page
2-9). A ProCurve Switch 8100fl is mounted
2-15). ProCurve 8100fl switches come with
2-16). There are three types of modules in each
4-9).
(page
2-24). There are three power supply
Advertisement
Table of Contents
Troubleshooting
