HP ProCurve 8100fl Series Installation And Getting Started Manual page 19

Table 1-4.
The 10-Port 100/1000 Base-T Module shows the link status of each port on top
and has an LED showing the activity status of each port on the bottom.
10-Port 100/1000Base-T
Module
Link and
Activity LEDs
(per port)
Ports 1-4
Ports 5-6
Ports 7-10
Status LED
10-Port 100/1000Base-T Module (J8734A) LEDs
LED Color State
Link Green Solid
(per port)
Amber Solid
n/a Off
Activity Green Flashing
(per port)
n/a Off
Status n/a Off
Green Flashing
Green Solid
Yellow/ Flashing
Orange
Introducing the ProCurve Series 8100fl Switch
Front of the Switch
Meaning
Port is in 1000 Mbps mode.
Port is in 100 Mbps mode.
No connector is plugged into the port.
Transmitting data.
No data is being transferred, and/or no
connector is plugged into the port.
No power to the module.
Module is powering up and downloading
operating software.
Software image loaded successfully.
Self-test failure.
1-9