Fan Trays; Leds; Management Module Leds - HP ProCurve 8100fl Series Installation And Getting Started Manual

Introducing the ProCurve Series 8100fl Switch
Front of the Switch

Fan Trays

The chassis contains two fan tray assemblies to provide a cooling air flow
across the switch modules. Each fan tray assembly contains three fans. The
fan tray assembly is hot swappable to allow for easy replacement of fans.

LEDs

The tables in this section describe how the LEDs on the switch chassis and
modules show the operational status of the switch and network connections.

Management Module LEDs

The management module has Active and Status LEDs showing the module's
operational status, plus LEDs on the RJ-45 port showing network connections.
The LED states are described in the following table.
Table 1-1.
Management Module
PCMCIA Card
Slot
10/100 Base-T
Port (RJ-45)
Active and
Status LEDs
1-6
Management Module (J8731A) LEDs
LED Color State
Active Green Flashing
Green Solid
n/a Off
Status n/a Off
Green Flashing
Green Solid
Yellow/ Flashing
Orange
10/100 Base-T Port
Activity n/a Off
(Act)
Green Flashing
Link n/a Off
Green Solid
Meaning
Negotiating active/backup management
module(s) during boot sequence.
Module is active - normal.
Module is in back up mode.
No power to the module.
Module is booting up and downloading
operating software.
Module is in service - normal.
Self-test failure.
No data is being transferred and/or no
connector is plugged into the port.
Transmitting data.
No connector is plugged into the port.
Link is up.