Page 2
Handicare accepts no liability for loss resulting from work executed by third parties. Names, trade names, etc. used by Handicare may not, as per the legislation concerning the protection of trade names, be considered as being available.
1.3.4 Replacing the tyre of the rear wheel ....................8 1.3.5 Adjusting the pressure brake ......................9 Replacement and repair activities for the Ibis XC and XC 16” and XC Power Support ....... 9 1.4.1 Rear wheels ........................... 9 1.4.2 Replacing the rear wheel of the Ibis XC ..................
Page 4
E. Maximum load in kg MAX.LOAD/MAX.BELASTB./ZUL.GESAMTGEW.: The location of the identification plate differs per model: A. Ibis XA, Ibis XC, Ibis XC 16" and Ibis XC Power Support B. Ibis XP with rear-wheel drive C. Ibis XP with front-wheel drive...
Page 5
Product for another purpose than the one for which it was intended; - Parts of the Product are replaced by parts of another origin than those used by Handicare and/or parts of the Product are replaced without the permission of Handicare.
Page 6
Taking into consideration the following stipulations, Handicare only accepts liability for loss due to death or physical injury that is the result of a defect in the Product for which Handicare is responsible and for damage to another object that is the private property of the user of the Product, as long as said loss is the direct result of a fault in the Product.
Maintenance Maintenance Maintenance table Everything that is used should be maintained. This is also true for your wheelchair. Below, we have indicated what needs to be checked, how often this should be done, and by whom. Time Type Ibis Description To be carried out by User Dealer...
Maintenance 1.3.2 Replacing rear wheels The rear wheels should be removed as follows: Remove locking nut (A) with a 17 mm box spanner. • Remove the complete rear wheel (B) from axle (C). • Remove the tyres, see ‘Repairing the tyre of the rear •...
- towards the wheel: brake tighter. Tighten the screw in the set position. • Replacement and repair activities for the Ibis XC and XC 16” and XC Power Support 1.4.1 Rear wheels To ensure proper operation of the wheelchair, it is very important that the tyres are kept at the correct pressure.
‘Replacing the tyre of the drive wheel’. Fit the new wheel in the reverse order. 1.4.3 Replacing the rear wheel of Ibis XC 16” (option) When replacing a rear wheel, the wheel may not be braked. Replace the rear wheel as follows: Support the wheelchair in such a way that the wheel is •...
Maintenance 1.4.5 Repairing the tyre of the rear wheel When repairing the inner tube of a rear wheel, the wheel should be braked, so that it does not rotate at the same time. Repair a flat tyre as follows: Support the wheelchair in such a way that the wheel is elevated. •...
- Clockwise: brake tighter. - Anti-clockwise: brake looser. 1.4.8 Adjusting the pressure brake of the Ibis XC 16” (option) The wheelchair is equipped with drum brakes on the rear wheels, which can be either operated by hand by the user, or with the foot by the person pushing the wheelchair.
Fit a new wheel in the reverse order. 1.5.2 Repairing the tyre of the rear wheel See below: ‘Replacement and repair activities for the Ibis XC’. 1.5.3 Replacing the tyre of the rear wheel See below: ‘Replacement and repair activities for the Ibis XC’.
Maintenance Step 3: Remove the wheel; see 'Replacing drive wheel'. • Loosen three Allen bolts (A) and nut (B) with a 5 mm Allen • key and remove motor (C). Use a 10 mm open-ended spanner for the nut. Fit a new motor in the reverse order. 1.5.5 Replacing the batteries Replace the batteries as follows:...
Maintenance 1.5.7 Replacing the Controller Replace the controller as follows: Step 1: See 1.5.4 (step 1). • Step 2: Cut the Ty-Raps that hold the cable to the frame and to • other cabling. Loosen the four screws (A). • Remove the controller (B).
Maintenance 1.6.2 Replacing a fork Replace the fork as follows: Remove the wheel from the fork; see 'Replacing a wheel'. • Remove screw (A) with a Phillips screwdriver. • Remove cap (B). • Loosen bolt (C) using a 19 mm box spanner and prevent •...
Technical specifications Standard program for the Ibis XP with front-wheel drive General settings Lowest Forward Speed (%) Lowest Turning Speed (%) Sleep Timer (Min) Wakeup Style Buttons Beep on Key press Speed Button Sensitivity Joystick Throw Normal Joystick Switch Threshold (%) Lock Enable Field Programmability Full...
Page 19
Technical specifications Stability Profiles 5 to 8 Profile 5 Profile 6 Profile 7 Profile 8 Stability Profile Name NoCT Swivel LoCT Swivel MedCT Swivel HiCT Swivel Maximum Speed in turn (%) Speed Acceleration Scalar (%) Turning Acceleration Scalar (%) Turning at Maximum Speed (%) Turning Acceleration at Maximum Speed (%) Traction at Maximum Speed pot (%) FWD/RWD Swivel...
Technical specifications Standard program for the Ibis XP with rear-wheel drive General settings Lowest Forward Speed (%) Lowest Turning Speed (%) Sleep Timer (Min) Wakeup Style Joystick Beep on Key press Speed Button Sensitivity Joystick Throw Normal Joystick Switch Threshold (%) Lock Enable Field Programmability Full...
Page 21
Technical specifications Stability Profiles 5 to 8 Profile 5 Profile 6 Profile 7 Profile 8 Stability Profile Name NoCT Swivel LoCT Swivel MedCT Swivel HiCT Swivel Maximum Speed in turn (%) Speed Acceleration Scalar (%) Turning Acceleration Scalar (%) Turning at Maximum Speed (%) Turning Acceleration at Maximum Speed (%) 100 Traction at Maximum Speed pot (%) FWD/RWD Swivel...
Technical specifications Electrical wiring diagram of the XP Error codes of the XP fault table Check the malfunction/signal with the aid of the following list. Flash Description User Fault Possible stall timeout or user error Battery Fault Check the batteries & cabling Left Motor Fault Check the left motor connections &...
Parts lists Software upgrade manual Power Support Installing the update software Start the “pssetup.exe” installation form the CD / USB stick. Choose English For an English Installation procedure and press “OK” . Press “Next >”. Version 2011v2...
Page 24
Parts lists Select “Install for anyone using this computer” and press “Next >”. When “Install just for me” is selected, only the current user will be able to use the software. Select the destination folder for the software and press “Next >”. Version 2011v2...
Page 25
Parts lists Choose a Start Menu folder , for placing the shortcuts, and press “Next >”. Wait for the installation to finish and press “Next >”. Version 2011v2...
Page 26
Parts lists Check the box in front of “Start Power Support Upgrader” off and press “Finish”. Upgrading 3.2.1 Why and when to upgrade The upgrade of the power support should be carried out when one of the following parts are replaced - Motor Left - Motor Right - Battery...
Page 27
Parts lists 3.2.3 Connecting the cables Connect the COM-cable to the Power support and to the laptop/pc. Activate the Power Support by turning the switch in to one of the levels and pressing the lever . 3.2.4 Upgrading the Software Star t the “Power Support Upgrader”...
Page 28
Parts lists Now press on Communication and select the COM-Port that is used for the Power Support and press OK . Now select “File” and press “Open”. Now select the file you need for upgrading the Power Support , you can choose for a 5 or a 7- leveled version of the Power Support. These numbers correspond with the version of the Power Support you are upgrading.
Page 29
Parts lists When you get this error the version number of the Power Support is lower then 1.2. When this is the case you should first perform the PreUpgrade, therefore you should continue the upgrade from sect ion 3.2.5. Press “Start” and wait for the upgrade to finish. Version 2011v2...
Page 30
Parts lists Press “OK” when the upgrade is completed to finish the upgrade. 3.2.5 Upgrading with PreUpgrade (Only for version number 1.1 and older ) Select “File” and the press “Open”. Now select the “PreUpgrade PMU.upk” and press “Open”. You need this file for making the system ready for the actual upgrade. Version 2011v2...
Page 31
Parts lists Press Start and wait for the PreUpgrade to finish. Now select “File” and the press “Open”. Now select the file you need for upgrading the Power Support, you can choose for a 5 or a 7- leveled version of the Power Support. These numbers correspond with the version of the Power Support you are upgrading.
Page 32
Parts lists Press Start and wait for the upgrade to finish. Press “OK” when the upgrade is completed to finish the upgrade. Version 2011v2...
Page 33
Parts lists 3.2.6 Checking the system Disconnect the COM-Cable to the Power Support and check the following points - Turn the system on and check if the system goes on. - Does the system give support? - Is there a distinctive difference between the different levels? 3.2.7 Troubleshooting Has the check showed the system doesn’t function as it should or the Upgrade gave an...
Page 34
Parts lists Use of the parts lists This document is meant as a reference book to be used to order parts for the wheelchair that is shown on the front cover. How to order: When ordering parts, please specify: Serial number (see the identification plate) •...
Page 35
018 t/m 028 029 t/m 036 037 t/m 043 Drawing Description Page 001-010 Sedeo 26-39 011-017 Ibis XA/XC 40-47 018-028 Ibis XP 48-61 029-036 Ibis XC 16” and Ibis XC Power Support 62-68 037-043 Options, wiring and modules 69-76 Version 2011v2...
Parts lists SEDEO Drawing Description Page Sedeo seating frame Upper part Armrest XA XC XP Central legrest XA/XC Central legrest XP Standard leg rest Comfort mechanical leg rest Seat / backrest / calf plate Head rest Gas spring backrest adjustment Version 2011v2...
Page 37
Parts lists 001: Sedeo seating frame • 18 17 9 10 11 10 13 Article number Units Description 02030.4123 Back part 2 Sedeo short back arm 00000.9009 Insert cap round 15 black 00001.0204 Washer 00000.1401 Shaft lock washer 15mm 00000.3728 Button head M8X12 02030.3423 Back tube...
Page 38
Parts lists 002: Upper part • Article number Units Description 00000.4801 Handle black 1007008 Handle mech.seat adj. 1008057 Mechanical cable 1007684 Adjusting nipple 00001.1400 Label tilt adjustment 02030.0111 Handlebars 00000.6801 Wing bolt M8X20; L=40 1001834 Back frame 9001374 Push frame small XP 9001155 Leg rest holder left, Ibis X-series 9001156...
Page 39
Parts lists 003: Armrest XA XC XP • XA/XP Article number Units Description 221.00111.505 Armrest 40 cm 221.00131.505 Armrest 30 cm 00000.3206 Screw M5X16 02040.0311 Upper part long 02040.0111 Upper part short 00000.3541 Adjusting screw M8X10 9002127 Centre piece 9002129 Centre piece extended 10cm 224.00241.505 Side cushion...
Page 40
Parts lists 004: Central legrest XA/XC • Article number Units Description 1001087 Central legrest 9001218 Cable 1002808 Gasspring bloc-o-lift 400N+unlock+nut 1001086 Metalparts central legrest 00000.6410 Handle 00000.1700 Lock nut M5 00000.3616 Screw M5x12 01050.2480 Footplate 00000.3614 Screw M6x20 220.00201.505 Calf pad trapezium 00000.2002 Washer flat M6 D125A/VZ 00000.4016...
Page 41
Parts lists 005: Central legrest XP • Article number Units Description 140.00061.000 Central leg rest XP 1011019 Central leg rest with calf plate bracket 9001719 Upper part hinge 00001.1324 Label tilting hazard 00000.3706 Button head M8X25 20050.1311 Lower tube 00000.5002 Bearing bush nylon 8x11x13 00000.4100 Hex bolt M8X150...
Page 42
Parts lists 006: Standard legrest • Article number Units Description Standard leg rest left See page 34. Standard leg rest right See page 34. 1002515 Standard leg rest upper part left 1002514 Standard leg rest upper part right 01500.1112 Legrest release lever 01500.2212 Legrest release spring Footplate left...
Page 43
Parts lists 007: Comfort mechanical legrest • Article number Units Description Comfort leg rest left See page 34. Comfort leg rest right See page 34. 1002517 Comfort leg rest upper part left 1002516 Comfort leg rest upper part right 1008580 Hinge comfort leg rest 01500.1112 Legrest release lever...
Page 44
Parts lists SPARE PARTS SEDEO LEGRESTS AND FOOTPLATES LEGRESTS CALF PLATE AND CALFSTRAP AND TYPE SIZE RIGHT LEFT LEGRESTBRACKET LEGRESTBRACKET, SET 1003561 1003560 1003592 1003579 1003563 1003562 1003593 1003580 01500.9019 01500.9119 140.00071.000 140.00011.000 STANDARD 1003565 1003564 1003594 1003581 1003567 1003566 1003595 1003582 1003569...
Page 45
Parts lists 008: Seat / backrest / calf plate • Article number Units Description Sedeo Seat See page 36. 00000.3617 Screw M5X30 00000.6501 Pipe clamp DIA 22 black 220.00121.505 Calf plate standard 220.00141.505 Calf plate small 00000.3206 Screw M5X16 Sedeo backrest See page 36.
Page 46
Parts lists SPARE PARTS SEDEO SEAT CUSHIONS PROFILED WITH GREY PROFILED MEMORY FOAM SUPPORT W X D MIDDLE BAR 42x50 200.42131.505 1002950 200.40481.517 205.42791.517 46x50 200.42211.505 1002951 200.40561.517 205.42871.517 50x50 200.42291.505 1002952 200.40641.517 205.42951.517 42x54 1001977 1002953 1001997 1002006 42x58 1001978 1002954 1001998...
Page 47
Parts lists SPARE PARTS SEDEO BACKRESTS PROFILED WITH GREY WITH LUMBAR PROFILED EXTRA SOFT SUPPORT W X D MIDDLE BAR 42x52 207.20031.505 1002974 215.20031.505 207.20211.520 46x52 207.20051.505 1002975 215.20051.505 207.20231.520 50x52 207.20071.505 1002976 215.20071.505 207.20251.520 42x56 1002143 1002977 1002161 1002179 42x60 1002144 1002978...
Page 48
Parts lists 009: Headrest • Article number Units Description 222.00151.505 Headrest type 4, small mode, black Sellaskin 222.00131.505 Headrest Type 3, Flexible, black Sellaskin 222.00111.505 Headrest Type 2, Large, black Sellaskin 00000.3206 Screw bck/kr M5X16 D7985 02193.0023 Metal Section Headrest. Standard Adjustable 02194.0023 Metal Section Headrest.
Page 49
Parts lists 010: Gas spring backrest adjustment • Article number Units Description 1003440 Gasspring backrest adjustment complete 02152.9200 Gasspring backrest adj. 02010.6910 Gasspring unlock mechanism 1002813 Gasspring bloc-o-lift 200N 1008057 Cable 1007008 Handle 00001.0914 Screw M8X16 02030.3523 Bracket backrest adjustment 00000.2250 Spring washer fluted M8 00000.1801...
Parts lists Ibis XA and Ibis XC Drawing Description Page Carrier Seat post Brake system XA Brake system XC Wheel, castor Rear wheel XA Rear wheel XC Version 2011v2...
Page 51
Label IBIS 1002632 Label XA 1002631 Label XC 1003247 Label back rest angle (sticker sheet) 9000872 Adhesive logo button 9002232 Handicare logo Identification plate 1008040 Anti tip (set) 00000.4311 Hexagonal tap bolt M8X20 VZ 00000.2203 Spring washer SW8 9000999 Anti tip...
Page 52
Parts lists 012: Seat post • Article number Units Description 00000.4014 Cyl cap screw M6X50 02010.6182 Upper hinge block 22mm 9000951 Sedeo seating frame, Ibis X-series 02010.7682 Lower hinge block 22mm 1003247 Label seat height symbol (sticker sheet) 1008044 Seat angle indicator 1003247 Label seat angle (sticker sheet) 00000.4036...
Page 53
Parts lists 013: Brake system XA • Article number Units Description 00000.1704 Lock nut M12 00000.2005 Washer flat M12 9001025 Wheel plate left 9001075 Wheel plate right 1003247 Label wheels (sticker sheet) 9001097 Wheel axle 00000.1703 Lock nut M10 1002639 Hex bolt M12X35 00000.2005 Washer flat M12...
Page 54
Parts lists 014: Brake system XC • Article number Units Description 9000915 Wheel,12",air,with brake,assy,left, Ibis XC 1002790 Wheel,12",PU,with brake,assy,left, Ibis XC 9001076 Wheel,12",air,with brake,assy,right,Ibis XC 1002791 Wheel,12",PU,with brake,assy,right,Ibis XC 00000.1704 Locknut M12 D985/8/vz 9001199 Brake complete left 9001200 Brake complete right 00001.1409...
Page 55
Parts lists 015: Swivel Castor • Article number Units Description 1008053 Front fork 00000.4310 Hex bolt M12X50 00000.6007 Shim 12X18X1 00000.1802 Cap lock nut M8 9002729 Lock nut M12 00000.4001 Cyl cap screw M8X75 1001446 Wheel,castor,7",air,assy 1001447 Wheel,castor,7",PU,assy Version 2011v2...
Page 56
Parts lists 016 Rear wheel XA • MAX. Article number Units Description 03877.0100 Wheel 20" air 1002746 Wheel 20" PU 03875.0100 Wheel 22" air 1002748 Wheel 22" PU 03860.1100 Wheel 24" air 1002750 Wheel 24" PU 1003690 Tube 20" 1003691 Tube 22"...
Page 57
Parts lists 017: Rear wheel XC • MAX. Article number Units Description 1001138 Wheel 12" air 1001166 Wheel 12" PU 1003689 Tire 12" 01010.3300 Tube 12" 00001.1461 Label tire pressure 2.5 Bar (sticker sheet) Version 2011v2...
Parts lists Ibis XP (front-wheel and rear-wheel drive) 018/019 Drawing Description Page Carrier ( RWD without wheels) Carrier ( FWD without wheels) Seat post Wheel, castor Motor (RWD) Motor (FWD) Driven wheel Remote Swing-away bracket for remote Batteries (standard) 58 t/m 59 Batteries (option) 60 t/m 61 Version 2011v2...
Page 59
Hex bolt M8X16 1002633 Label XP (sticker sheet) 1002629 Logo IBIS 1002789 Screw 4X16 9001140 Tube cap 9002232 Handicare logo 9000872 Adhesive logo button 1003247 Label transport fixation (sticker sheet) 9000943 Tube cap 1008062 Anti-tip set Ibis XP Version 2011v2...
Page 60
Hex bolt M8x25 00000.5403 Wheel anti tip 00000.4105 Hex bolt M8X40 00000.2003 Washer flat M8 00000.1702 Lock nut M8 9000872 Adhesive logo button 9002232 Handicare logo 9000943 Tube cap 1008061 Carrier frame FWD 1008062 Anti-tip set Ibis XP Version 2011v2...
Page 61
Parts lists 020: Seat post • Article number Units Description 00000.4014 Cyl cap screw M6X50 02010.6182 Upper hinge block 22mm 9000951 Sedeo seating frame, Ibis X-series 02010.7682 Lower hinge block 22mm 1003247 Label seat height symbol (sticker sheet) 1003247 Label seat height (46,5-54 cm) (sticker sheet) 9001207 Seat post long 00001.0914...
Page 62
Parts lists 021: Swivel Castor • Article number Units Description 1008053 Front fork 9002729 Lock nut M12 00000.6007 Shim12X18X1 00000.1802 Cap lock nut M8 00000.4310 Hex bolt M12X50 00000.4001 Cyl. cap screw M8X75 9001454 Wheel,castor,8",air,assy 9001505 Wheel,castor,8",PU,assy 00001.1461 Label tyre pressure 2.5 Bar Version 2011v2...
Page 63
Parts lists 022 Motor (rear-wheel drive) • Article number Units Description 00000.4312 Hex bolt M8X16 00000.2003 Washer flat M8 9001303 Battery box 00000.1701 Lock nut M6 00000.2002 Washer flat M6 9001302 Bracket battery box 9001046 EMD motor B (FWD right, RWD left) Schmid motor B (FWD right, RWD left) (from serial 1008586 number MXPR00833)
Page 64
Parts lists 023 Motor (front-wheel drive) • Article number Units Description 00000.4312 Hex bolt M8X16 00000.2003 Washer flat M8 9001303 Battery box 00000.1802 Cap lock nut M8 9001047 EMD motor A (FWD left, RWD right) Schmid motor A (FWD left, RWD right) (from serial 1008585 number LXPF00930) 9001046...
Page 65
Parts lists 024 Driven wheel • MAX. Article number Units Description 1001174 Wheel 12.5" air 1002946 Wheel 12.5" PU 15010.4200 Tire 12.5" 15010.4100 Tube 12.5" 00001.1462 Label tire pressure 2.7 Bar 9002006 Wheel cover, plastic Version 2011v2...
Page 66
Parts lists 025 Remote • Article number Units Description 00000.9301 Insert cap 15mm square 00000.3541 Adjusting screw M8X10 06040.0923 Fixed bracket for remote 00000.3541 Adjusting screw M8X10 00000.3206 Screw M5X16 00000.2201 Spring washer M5 9000265 Shark mounting plate 00000.1705 Lock nut M4 00000.2006 Washer flat M4 00000.3212...
Page 67
Parts lists 026 Remote (swing-away) • Article number Units Description 1009533 Swing-away bracket for remote right 1009536 Swing-away bracket for remote left 008.00000.191 Sticker, trap danger 00000.9301 Insert cap 15mm square 9000265 Shark mounting plate, Yes/X-series 00000.2201 Spring washer M5 00000.3206 Screw M5X16 00000.1705...
Page 68
See 042: Wiring and modules Shark 9001303 Battery box See 027a: Batteries (standard) 001.23000.001 Star knob M6X13 9000872 Adhesive logo button 9002232 Handicare logo 9002757 Battery (27Ah C5) (31Ah C20) 9001308 Battery strap 055.00000.013 Wire battery loop 9001373 Power cable Shark...
Page 69
See 042: Wiring and modules Shark 9001303 Battery box 1008063 Battery cover 001.23000.001 Star knob M6X13 9000872 Adhesive logo button 9002232 Handicare logo 9002757 Battery (27Ah C5) (31Ah C20) 9001308 Battery strap 055.00000.013 Wire battery loop 9001373 Power cable Shark 1001651...
Page 70
See 042: Wiring and modules Shark 9001306 Battery box extended See 028a: Batteries (optional) 001.23000.001 Star knob M6X13 9000872 Adhesive logo button 9002232 Handicare logo 9002758 Battery (34Ah C5) (40Ah C20) 9001308 Battery strap 055.00000.013 Wire battery loop 9001373 Power cable Shark...
Page 71
Zie 042: Wiring and modules Shark 9001306 Battery box extended 1008064 Battery cover extended 001.23000.001 Star knob M6X13 9000872 Adhesive logo button 9002232 Handicare logo 9002758 Battery (34Ah C5) (40Ah C20) 9001308 Battery strap 055.00000.013 Wire battery loop 9001373 Power cable Shark 1001651...
Parts lists Ibis XC 16” and Ibis XC Power Support Drawing Description Page Carrier (See 011) Seat post (See 012) Brake system (XC 16") 63-64 Brake system (XC Power Support) Swivel castor (See 015) Rear wheel (XC 16") Battery pack...
Page 73
Parts lists 031 Brake system (XC 16") Situation upon serial number: JIX 6387. • Note: From serial number JIX 6388 the 16” wheel and mounting has been changed. If parts are needed for the old situation, the new situation should be applied. We advise to change both sites. For spare parts see drawing 31a Version 2011v2...
Page 74
Parts lists 031a Brake system (XC 16") Situation from serial number: JIX 6388. • Article number Units Description 00000.1704 Lock nut M12 00000.2005 Washer flat M12 9001254 Interface plate 9001183 Brake assy left - double action 9001184 Brake assy right - double action 9001258 Brake mounting plate left 9001257...
Page 75
Parts lists 032 Brake system (XC Power Support) • MAX. Article number Units Description 001.03010.001 Hex bolt M10x40 00000.2004 Washer flat M10 1003706 Foot lever 9000995 Fixation block 1003707 Toothed spring washer M14 1003708 Cap lock nut M14 00000.5712 Distance bush nylon 8.2X12X7.5 00000.2003 Washer flat M8 00000.1702...
Page 76
Parts lists 034 Rear wheel (XC 16") • MAX. Article number Units Description 9002038 Wheel 16" air 9002039 Wheel 16" PU 1003693 Tire 16" 1003694 Tube 16" 00001.1461 Label tyre pressure 2.5 Bar Version 2011v2...
Page 77
Parts lists 035 Battery pack • Article number Units Description 00000.4036 Cyl cap screw M5X12 00000.2101 Washer flat 3XD M5 9001019 Power pack mounting plate right 9001015 Power pack mounting plate left 00000.2003 Washer flat M8 00000.1702 Lock nut M8 00000.4312 Hex bolt M8X16 7648...
Page 78
Parts lists 036 Remote (XC Power Support) • Article number Units Description 1010220 Power support remote 1010221 Power support throttle lever 1003020 Tube clamp 1008315 Power support remote housing (7 positions) 1010224 Power support remote housing (5 positions) Version 2011v2...
Parts lists Options, wiring and modules Tekening Benaming Pagina Electrical tilt Electrical lift Supplementation set for electrical tilt or lift XA/XC Coupled push brake Ibis XA Tilt operated by user Wiring and modules Shark Kerb climber Version 2011v2...
Page 80
Parts lists 037 Electrical tilt • Article number Units Description 1003391 Electrical tilt 00355.5573 AMP plug 2-polig 00000.1404 Shaft lock washer 7MM 9001398 Hinge block 9001509 Axle 9001282 Actuator for electrical tilt 9001128 Gasspring hinge block 00000.2203 Spring washer SW8 00000.4312 Hex bolt M8x16 00000.3608...
Page 81
Parts lists 038 Electrical lift • Article number Units Description 1006115 Electrical lift, XP, 160kg 00000.4014 Cyl cap screw M6X50 02010.6182 Upper block 02010.7682 Washer 9001835 Electrical lift module, XP, 160kg 00000.3608 Screw M8X16 00000.1404 Shaft lock washer 7MM 9001398 Hinge block 9001154 Axis gasspring...
Page 82
Parts lists 039 Supplementation set for electrical tilt or lift XA/XC • 10 9 Article number Units Description 1003378 Supplementation set for electrical tilt or lift, XA/XC 008.00000.251 Sticker, charger socket 00000.1700 Locknut M5 D985/8/VZ 00000.2101 Washer flat 3XD M5 D9021/VZ 1003284 Electrical control 9001603...
Page 83
Parts lists 040 Coupled push brake Ibis XA • Article number Units Description 1003167 Coupled push brake, left 1003168 Coupled push brake, right 9001551 Brake, active, left 9001668 Brake, active, right 9001671 Brake, passive, left 9001552 Brake, passive, right 9001515 Cable for coupled brake Version 2011v2...
Page 84
Parts lists 041 Tilt operated by user • Article number Units Description 1003521 Self tilt 60-90 KG, Ibis X-Series 1003522 Self tilt 90-120 KG, Ibis X-Series 00000.3606 Screw pl.verz/kr M5X16 VZ 9001364 Mounting bracket 1002641 Self tapping screw M5x20 00000.6410 Handle 00000.1700 Locknut M5 D985/8/VZ...
Page 85
Parts lists 042 Wiring and modules Shark • Article number Units Description 1003091 Shark remote drive & lighting 1002943 Shark remote lighting & actuators 1001179 Shark remote drive only 1010366 Shark power mod. drive only 1003092 Shark power module drive & lighting 1002944 Shark power module lighting &...
Page 86
Parts lists 043 Kerb climber • Article number Units Description 9001345 Kerb climber Ibis XP 00000.6801 Star knob M8x20 03411.2100 Kerb climber gas spring 03411.0190 Kerb climber shoe Version 2011v2...
Need help?
Do you have a question about the Ibis XC and is the answer not in the manual?
Questions and answers