6A5-8 V8 ENGINES
— Do not attempt to loosen the manifold by
prying under the gasket surface w ith any
tool.
3. Gasket (22).
4. Seals (23) (7.4L engines).
ROCKER ARM COVER REMOVAL
|+ + | Remove or Disconnect (Figures 9 and 10)
1. Bolts.
2. Rocker arm covers (32). If the rocker arm cover
adheres to the cylinder head, try to shear the gas
ket by bumping the end of the cover with a rubber
mallet. If the cover will not come loose, carefully
pry until loose. DO NOT DISTORT THE SEALING
FLANGE.
3. Gaskets (34).
VALVE TRAIN COMPONENT
REMOVAL
|* + | Remove or Disconnect (Figures 11 through
15)
Tools Required:
J 3049-A Valve Lifter Remover (Plier Type)
J 9290-01 Valve Lifter Remover (Slide Hammer
Type)
1. Nuts (40), balls (41), rocker arms (42) and push
rods (43).
32
30. Bolt
31. Support
32. Rocker Arm Cover
Figure 10—Rocker Arm Cover (7.4L Engines)
, - v
U }*rx * 7
_
32. Rocker Arm Cover
34. Gasket
36. Bolt
Figure
Rocker Arm Cover (5.0L and 5.7L
Engines)
F9362
F9326