Chevrolet 1991 Light Duty Truck Repair Manual page 292

404-22 8 1/4 AND 9 1/4-INCH RING GEAR
SQUARE UP DEFLECTOR RING AND TIGHTEN
NUT UNTIL RING BOTTOMS AGAINST SHOULDER
OF OUTER RACE
18. C/V Joint Outer Race
19. Deflector Ring
Figure 42—Installing Outer Deflector Ring
ONTO AXLE SHAFT UNTIL RETAINING
RING IS SEATED IN GROOVE ON AXLE SHAFT
12. Axle Shaft
18. C/V Joint Outer Race
________________________________F6725
Figure 44— Installing C/V Joint
F6723
• Position the cage (17) and the inner race (16)
90°to the center line of the outer race (18) and
align the cage windows with the lands of the outer
race (see figure 48).
• Separate the cage (17) and the inner race (16)
from the outer race (18).
• Rotate the inner race (16) 90'to the center line of
the cage (17) with the lands of the inner race
aligned with the windows of the cage (see figure
49).
• Pivot the inner race (16) into the cage (17) window
and remove the inner race.
|nfr-| Assemble
• Put a light coat of recommended grease on the
ball grooves of the inner race (16) and the outer
race (18).
• Reverse the steps of the disassembly procedure.