Assembly Of The Clutch And Shaft Seal - Chevrolet 1991 Light Duty Truck Repair Manual

1B5-4 SD-709 AIR CONDITIONING COMPRESSOR
Figure 9— Removing the Coil Snap Ring
Remove or Disconnect (Figures 2 and 10
through 12)
Tools Required:
J 4245 Internal Snap Ring Pliers
J 9553-01 O-Ring Remover
J 38468 Shaft Seal Remover and Installer
J 38479 Seal Seat Remover and Installer
1. Clutch shims (3) using J 9553-01 and a small
screwdriver.
2 Felt ring metal retainer (25).
• Insert the points J 4245 into the holes in the
retainer and lift out (figure
3. Shaft seal seat snap ring.
4. Shaft seal seat (23) with J 38479 (figure 11).
5. Seal assembly
• Press J 38468 against the seal spring and twist
the tool until it engages the slots of the seal
cage (figure ).
12
ASSEMBLY OF THE CLUTCH
AND SHAFT SEAL
SHAFT SEAL
!-►+] Install or Connect (Figures 2, 11 and 13)
Tools Required:
J 29640 Shaft Protector
J 38468 Shaft Seal Remover and Installer
J 38479 Seal Seat Remover and Installer
).
10