Drobo storage system User Manual page 41

From E-mail Address
Mail Server
Port
Authentication
Username
Password
Use SSL
Send Test E-mail
E-mail address from which the alert is sent from.
Server used to send e-mail from. This can be specified
as a server name (ex. smtp.company.com) or a
server's IP address (ex. 127.0.0.1). If you are unsure,
contact your network administrator or your e-mail
service provider.
TCP/IP port your server expects SMTP submissions
through. By default this is set to Port 25. If you are
unsure, contact your network administrator or your e-
mail service provider.
Required if your SMTP server requires authentication.
If you are unsure, contact your network administrator
or your e-mail service provider.
Username you use to retrieve incoming e-mail.
Password you use to retrieve incoming e-mail.
Required if your SMTP server requires an encrypted
connection. If you are unsure, contact your network
administrator or your e-mail service provider.
Send a test e-mail based on your configuration.
41