Remote-Starting Your Vehicle; Setting Your Vehicle Into Ready Mode - Autostart AS-2360TW User Manual

By default, the multi-level features are programmed as follows:
To access a feature that is programmed as level 1, press the
desired function.
To access a feature that is programmed as level 2, press the
desired function.
To access a feature that is programmed as level 3, press the
by the desired function.
Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3 (
requires pressing the
Example: If the multi-level features were set to option 3, the setup would be as follows:
The "Basic features" are now programmed as level 3 and therefore:
To access the aux.2 feature, the user needs to press on the
followed by the
To access the status request feature, the user needs to press on the
three (3) times followed by the
To access cold weather mode, the user needs to press on the
times followed by the

Remote-Starting Your Vehicle

Setting Your Vehicle into Ready Mode

This product is designed for vehicles with a manual transmission only. In order to start the vehicle
by remote, the unit must first be set to Ready Mode. If the unit is not set to Ready Mode, it cannot
remote-start the vehicle.
Once the system is set to Ready Mode, the vehicle can be remote-started and stopped at wish.
The system will exit Ready Mode if a door or the hood is opened, if the brake pedal is pressed, if
the parking brake is disengaged or if the ignition key is turned to the
AS-2360TW User Guide
Level 1 (Basic Features)
Level 2 (Multi car operation)
Level 3 (Customized Features)
Option 1:
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
Option 2:
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
Option 3:
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
Option 4:
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
Level 1 Customized feature
Level 2 Multi car operation
Level 3 Basic features
button.
LOCK
TRUNK
button.
START/STOP
SHIFT
SHIFT
SHIFT
Multi car operation
Basic features
Customized features
Basic features
Multi car operation
Customized features
Customized features
Multi car operation
Basic features
Basic features
Customized features
Multi car operation
button.
IGNITION ON (RUN)
button once followed by the
button twice followed by the
button three times followed
button three (3) times
SHIFT
button
SHIFT
button three (3)
SHIFT
position.
P. 7