Operation - LawnMaster MEB1016M R Operator's Manual

ASSEMBLY
SETTING CUTTING HEIGHT (See Fig. 14)
When shipped, the wheels on the mower are set to a low-cutting position. Bofore using the mower for
the first time, adj ust the cutting position to the height best suited for y o ur lawn. The average lawn
should be between 1" to 3".
To set the cutting height:
■ To raise the cutting height, grasp the height adj ustment lever and move it toward the back of the mower.
■ To lower the cutting height, grasp the height adj ustment lever and move it toward the front of the mower.

OPERATION

WARNING
Do not allow familiarity with this ty pe of product to make y ou careless. Remember that a careless
fraction of a second is sufficient to inflict serious inj ury .
WARNING
Alway s wear safety goggles or safety glasses with side shields when operating this product. Failure
to do so could result in obj ects being thrown into y our ey es, resulting in possible serious inj ury .
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal inj ury .
APPLICATIONS
You may use this product for the purpose listed below: Mowing y o ur lawn
Fig. 14
15