LawnMaster MEB1016M R Operator's Manual page 14

ASSEMBLY
REDI-BAG GRASS CATCHER (See Figs. 8-11)
■ our Lawnmaster mower comes with a tool-less collection bag. our REDI-bag ships flat as shown.
■ To assemble the REDI-bag straighten the hinged steel frame at opening of bag as shown.
■ Pry open the long soft plastic tubular sleeve with you fingers and insert the steel frame into the
tube as shown.
■ ou fully assembeld REDI-bag as shown below.
Hinge
INSTALLING THE GRASS CATCHER (See Fig. 12)
NOTE: When using the grass catcher, do not install the mulching plug.
■ Lift the rear discharge door.
■ Lift the grass catcher by its handle and place under the rear discharge door so that the hoo s on
the grass catcher are seated on the door rod.
■ Release the rear discharge door.
INSTALLING THE MULCHING PLUG (See Fig. 13)
NOTE: When using the mulching plug, do not install the grass catcher.
■ Lift the rear discharge door.
■ Grasp the mulching plug by its handle.
■ Insert the plug into the rear discharge opening.
■ Lower the rear discharge door.
Steel Frame
Hinge
Hinge
Fig. 8
Steel Frame
Soft Plastic
Tube
Fig. 10
Fig. 12
14
Steel Frame
Hinge
Fig. 9
REDI-Bag Fully
Assembled
Fig.11
Fig. 13