Removing and replacing the front bezel
To remove and replace the front bezel:
1.
Remove the computer cover. Refer to "Removing the computer cover".
Note: For this procedure, it helps to lay the computer on its side.
2.
Remove the front bezel by releasing the three plastic tabs inside the chassis
and push the bezel outward as shown.
3.
To reinstall the bezel, align the plastic tabs on the bottom of the bezel with
the corresponding holes in the chassis, and then snap it into position at the
bottom and top of the chassis.
4.
Refer to the "Completing the installation".
Hardware Replacement Guide