Download  Print this page


available from the World Wide Web.
You can find the following information:
CRU removal and installation information
Troubleshooting information
Parts information
Links to other useful sources of information
To access this information, go to

Tools required

To replace some parts in your computer, you will need a flat-blade or Phillips
screwdriver. Additional tools might be needed for certain parts.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
When you are replacing a part, do not open the static-protective package
containing the new part until the defective part has been removed from the
computer and you are ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static-electricity damage:
Limit your movement. Movement can cause static-electricity to build up
around you.
Always handle parts and other computer components carefully. Handle
adapters, memory modules, system boards, and microprocessors by the
edges. Never touch any exposed circuitry.
Prevent others from touching the parts and other computer components.
Before you replace a new part, touch the static-protective package containing
the part to a metal expansion-slot cover or other unpainted metal surface on
the computer for at least two seconds. This reduces static electricity in the
package and your body.
When possible, remove the new part from the static-protective packaging,
and install it directly in the computer without setting the part down. When this
is not possible, place the static-protective package that the part came in on a
smooth, level surface and place the part on it.
Do not place the part on the computer cover or other metal surface.

Hardware Replacement Guide



Table of Contents

   Related Manuals for Lenovo 3000 H Series

Comments to this Manuals

Symbols: 0
Latest comments: