Machine Types 8701, 8973, 8983, 8995, 9277, 9287, 9387, And 9635; Removing And Replacing The Front Bezel - Lenovo ThinkCentre 8700 Hardware Maintenance Manual

Machine types 8701, 8973, 8983, 8995, 9277, 9287, 9387, and
9635

Removing and replacing the front bezel

To remove and replace the front bezel:
1. Remove the computer cover. See "Removing the cover" on page 129.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis and
1 Microprocessor and heat sink
2 Microprocessor fan connector
3 Memory connector 1
4 Memory connector 2
5 Diskette drive connector
6 Power connector
7 IDE connector 1
8 IDE connector 2
9 Power fan connector
10 SATA IDE connectors (2)
11 Clear CMOS/Recovery jumper
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch/LED assembly cable.
12 Front panel connector
13 Front USB connectors (2)
14 Front audio connector
15 CD-IN connector
16 PCI adapter connectors
17 PCI Express x1 adapter connector
18 Battery
19 PCI Express x16 graphics adapter
connector
20 System fan connector
21 12V power connector
Chapter 9. Replacing FRUs (tower computers)
133