Removing And Replacing The Front Bezel - Lenovo 6176 Hardware Maintenance Manual

Removing and replacing the front bezel

This procedure describes how to remove and replace the front bezel.
1. Remove the computer cover. See "Removing the cover" on page 117.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis and
3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with
4. Go to "Completing the FRU replacement" on page 147.
118
Hardware Maintenance Manual
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch and LED assembly cable.
the corresponding holes in the chassis, then pivot it inward until it snaps into
position on the left side.