Regency ANDROS Owner's Manual page 8

E C
LECTRICAL
Step 3. (Fig. 3) Receiver to House Supply Wires Electrical
Connections: Connect the black (hot) wire from the ceiling
to the black wire marked "AC in L" from the receiver.
Connect the white(neutral) wire from the ceiling to the white
wire marked "AC in N" from the Receiver. Secure the wire
connections with the plastic wire nuts provided.
Step 4. (Fig. 3) If your outlet box has a ground wire (green or
bare copper) connect it to the fan ground wires; otherwise
connect the hanging bracket ground wire to the mounting
bracket. Secure the wire connection with a plastic nut
provided. After connecting the wires, spread them apart so
that the green and white wires are on one side of the outlet
box and black and blue wires are on the other side. Carefully
tuck the wire connections up into the outlet box.
NOTE: Fan must be installed at a maximum distance of 30
feet from the transmitting unit for proper signal transmission
between the transmitting unit and the fan's receiving unit.
ONNECTIONS
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
Blue (for light)
Blue (for light)
Black (motor)
Fig. 3
7
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
White ("to motor N")
(Connect to
Ground
ground wire on
(green)
hanger bracket
if no house
ground wire
exists.)
White (neutral)