Light Kit - Regency ANDROS Owner's Manual

I
NSTALLING THE
NOTE: Be sure the power is off before installing. NOTE:
1. Raise and hold the light kit close to the light plate and proceed to do the wire connections. Connect the white wire
connectors from the light kit and fan, follow the same procedure with the black wire connectors. (Fig. 1)
2. Tuck connections neatly into light plate, Place the light kit to the light plate with 3 screws provided. (Fig. 1)
3. Install 3 x 40W candelabra bulbs (included). (Fig. 2)
4. Remove the decorative nut and metal nut from the light kit. Place glass shade over the light kit stem, secure with
the metal nut (rubber side on the top), add the decorative bottom cover and decorative nut. Do not overtighten.
(Fig. 2)
5. Restore power and your light kit is ready for operation.
Wire nuts

Light kit

Fig. 1
L K
IGHT IT
Light plate
Screws
Light kit
Glass
shade
Metal nut
Decorative
bottom cover
Fig. 2
10
Bulbs
Decorative nut