Table of Contents
Advertisement
INSTALLATION
3) To replace the battery cover, slide the cover up until it
snaps into place.
Place the handset on the base. The battery icon will be
displayed on the handset. Once the handset is fully
charged, the display will show a full battery symbol.
The telephone has an automatic charging control to
avoid excessive charging.
Before the handset can be used, the handset
batteries must be charged for a minimum of 15 hours
on the AmpliDECT400BT base.
(*) Classified "hazardous voltage" according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
17
Advertisement
Table of Contents
