Creating Pptp + Static Ip Or L2Tp + Static Ip Wan Connection - D-Link User ManualDIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Creating PPTP + Static IP or L2TP + Static IP WAN Connection

To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 92. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Provider
Port
Name
Enable
Direction
MTU
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
Select the USB-WIMAX value to assign this connection to the
WiMAX USB modem.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 111 of 202
Configuring via Web-based Interface
Description