Operation Without User Intervention; Auto Start When The User Logs On; Select Options - VSCOM NetUSB-400i User Manual

4 Windows Utility
The current user (Bob) can either opt to Free the USB device or Ignore the Device Free Request
message initiated by the requestor. The requestor can only access the USB device if the current
user releases (Frees) the device.
The Device Free Request popup message is a modeless message box. The user can perform any
operations on the USBIP Admin Utility UI even when a device request message is displayed. If the
user does not attend to a device request popup message and receives another device request, then
the previous unattended popup will be closed and the new request will be displayed.

4.5 Operation without User Intervention

Some situations require to have the USB devices available to the system, without a user performing
the required operations. As seen in section 4.4.2 on page 24 this is configurable per device. However
2
this still requires to start the Device Mapping. A new software version allows for that.

4.5.1 Auto Start when the User logs on

This software allows to start the Device Mapping once the software itself is started.
Figure 40: Select options
From the File Menu select the settings option.
2
1.0.00.27
October 2009 NetUSB-400i User Manual 28