Basic Settings; Ip Settings; Usbip Change Server Name; Usbip Ip Settings - VSCOM NetUSB-400i User Manual

4 Windows Utility
Basic Settings: The Basic Settings page allows you to specify a server name. Check the Modify
box and enter a new Server Name (figure 16).
Figure 16: USBIP Change Server Name
IP Settings: The IP Settings page allows you to modify the IP Address and related parameters
on NetUSB-400i.
Figure 17: USBIP IP Settings
To modify the IP Address of the NetUSB-400i, check the Modify box and select the IP Configuration
as DHCP or Static from the drop-down list (figure 18).
Note: When the Firmware is newly installed, the USB Server will have default IP Address as
192.168.3.22.
Figure 18: USBIP Configure IP Settings
October 2009 NetUSB-400i User Manual 15