Jenn-Air 30"GAS DOWNDRAFT SLIDE-IN Installation Instructions Manual page 24

3. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner cover screws located at the front of the oven.
A
B
A. Oven bake burner cover
B. Oven bake burner cover screws
4. Lift up and remove oven bake burner cover.
5. Unscrew 2 wing nuts and remove oven baffle.
A
A. Oven baffle
B. Wing nuts
6. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner screws and the orifice hood cover screw.
A
A. Oven bake burner screws
B. Orifice hood cover
C. Orifice hood cover screw
D. Oven Bake burner
7. Lift up and remove orifice hood cover.
8. Lift up and remove oven bake burner.
9. Locate the oven orifice hood at the back of the oven cavity.
24
B
B
C
D
10. Using an adjustable wrench, turn the Number 49 Natural gas
oven bake burner orifice hood counterclockwise to remove.
A. Number 49 Natural gas oven bake burner orifice hood
11. Install the orange Number .047 LP gas oven bake burner
orifice hood, turning it clockwise 4 or 5 turns. Do not
overtighten.
A. Orange .047 LP orifice hood
12. Position the oven bake burner over the oven bake burner
orifice hood and reinstall using 2 screws.
A
A. Oven bake burner
B. Oven bake burner orifice hood
13. Reinstall orifice hood cover.
14. Reinstall the access panel.
B