Jenn-Air 30"GAS DOWNDRAFT SLIDE-IN Installation Instructions Manual page 28

5. Unscrew 2 wing nuts and remove oven baffle.
A
A. Oven baffle
B. Wing nuts
6. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner screws and the orifice hood cover screw.
A
A. Oven bake burner screws
B. Orifice hood cover
C. Orifice hood cover screw
D. Oven bake burner
7. Lift up and remove orifice hood cover.
8. Lift up and remove oven bake burner.
9. Locate the oven orifice hood at the back of the oven cavity.
10. Using an adjustable wrench, turn the orange Number .047 LP
gas oven bake burner orifice hood counterclockwise to
remove.
A. Orange number .047 LP gas oven bake burner orifice
hood
28
B
B
C
D
11. Install the Number 49 Natural gas oven bake burner orifice
hood, turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number 49 Natural gas oven bake burner orifice hood
12. Position the oven bake burner over the oven bake burner
orifice hood and reinstall using 2 screws.
A
A. Oven bake burner
B. Oven bake burner orifice hood
13. Reinstall orifice hood cover.
14. Reinstall the access panel.
Replace Oven Bake Burner Cover
1. Replace oven baffle and tighten 2 wing nuts.
2. To replace oven bake burner cover, insert tabs of cover into
slots in oven back. Replace and tighten 2 screws at the front
of the oven.
A
A. Slots in oven back
B
A