Jenn-Air 30"GAS DOWNDRAFT SLIDE-IN Installation Instructions Manual page 14

6. Lift and rotate the motor 90° to reposition the electrical
connection.
A. Electrical connector
7. Rotate bracket 90° and secure with 4 locknuts.
8. Remove the bracket from the other side of the blower motor,
rotate 90° and secure with 4 locknuts.
14
A
9. Position blower motor in cabinet opening and mount blower
motor to the floor.
Option 1
B
A
A. Inlet from range
B. Exhaust outlet
10. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
A
B
C
A. Inlet
B. Vent clamp
C. Floor
D. Vent system
11. Go to the "Make Gas Connection" section.
Top View
Option 2
A
D
B