Care And Maintenance; Daily Maintenance; Cleaning Earmoulds - ReSound Standard Tube User Manual

Care and maintenance

Proper handling
Your hearing instrument is protected by a layer of protective, hydrophobic nanocoat material.
However, please follow these instructions to further prolong the durability of your hearing instru-
ments.
1. Never immerse hearing instruments in water or other liquids, as liquids may cause permanent
damage to the hearing instruments.
2. Avoid rough handling of hearing instruments or dropping them on hard surfaces or floors.
3. Do not leave hearing instruments in or near direct heat or sunlight, as excessive heat can
cause damage or deform the casing.
4. Hair spray, make-up, etc. may damage hearing instruments. Remove the instruments prior
to the application of cosmetics.
32

daily maintenance

It is important to keep your hearing instrument clean and dry. On a daily
basis, clean the hearing instruments using a soft cloth or tissue. In order
to avoid damage due to humidity or excessive perspiration, the use of
a drying kit is recommended.

Cleaning earmoulds

1. Remove the earmould and attached tubing from the hearing
instruments prior to cleaning.
2. Clean the earmould using a mild soap, and rinse with lukewarm water.
3. After cleaning, dry earmoulds thoroughly and remove any residual
water and debris from the tubing utilising an air bulb and wire loop.
33