Daily Maintenance the information in this booklet. Proper understanding Cleaning the Microphone Sound Inlet and use of your new GN ReSound hearing instrument will allow you to derive maximum hearing benefit. Changing the Sound Outlet Filter/ Cleaning the Sound Outlet...
Please note that the instrument is using a small amount of power when in stand-by mode. On/Off Function Your ReSound hearing instrument is equipped with an on/off switch integrated into the battery com- partment. When the battery...
SmartStart Insertion of the Hearing Instrument SmartStart allows you the possibility for inserting the instru- To insert the hearing instrument into your ear: ment in the ear without annoying sounds like squealing. It delays the switch on time 10 seconds after closing the bat- 1.
“+” Removal of the CIC Hearing Instrument To remove the hearing instrument, simply grasp the removal cord with your thumb and forefinger and pull outward. Consult your hearing care professional if you have difficulty removing the hearing instrument. Removal of the ITC & ITE Hearing Instrument “+”...
Changing the Sound Outlet Filter/ Cleaning the Sound Outlet Your ReSound hearing instrument may be equipped with a sound outlet filter (consult your hearing care professional). This filter is located at the end of the sound outlet and prevents Daily Maintenance debris from getting into the hearing instrument.
Do not attempt to open the case of the hearing instrument since this would invalidate the warranty. If your GN ReSound hearing instru- ment requires service, please contact your hearing care professional for assistance.
General Precautions Technical Data Maximum Output (2cc Coupler / IEC 60118-7) • Consult a physician if you find a foreign object in your ear canal, if you experience skin irritation or if excessive ear wax accumulates with the use of the hearing instrument. 108 dB SPL (Typical) •...
Sound outlet 5,13 Stand-by mode Telecoil use 14,15 Telephone use Any issues relating to the EU Medical Device Directive Troubleshooting guide 16-17 93/42/EEC should be directed to GN ReSound A/S. User operated controls 4,6,8 Volume control Faceplate/Electronics by: GN ReSound A/S...
Page 13
Worldwide Headquarters Australia GN ReSound A/S GN ReSound Pty. Ltd. Lautrupbjerg 9 Unit R1 Regent Park Estate DK-2750 Ballerup, Denmark 391 Park Road Tel.: +45 45 75 11 11 Regent Park NSW 2143 Fax: +45 45 75 11 19 Tel.: 02 9743 9707 www.gnresound-group.com...
Need help?
Do you have a question about the 10 CIC and is the answer not in the manual?
Questions and answers