Direct Audio Input (Optional); Connecting/Disconnecting Audio Boots - ReSound Standard Tube User Manual

Behind-the-ear (bte)

Hide thumbs Also See for Standard Tube:

Table of Contents

Enlarged version

direct audio input (optional)

Use of direct audio input (DAI), which enables a direct connection of the hearing instruments to

items such as television, radio, and remote microphones, may increase speech understanding

for some individuals. The sound source is connected to the hearing instruments by a cable or

a wireless FM system to the audio boot. This accessory connects to the bottom of the hear-

ing instruments, and once properly clicked into place, the hearing instruments switch to DAI

automatically.

Connecting audio boots

1. Align the tip of the audio boot with the groove just above the battery

compartment and below the model number.

2. Once in place, move the boot in the direction

of the battery compartment.

3. Gently click the audio boot onto the hearing instrument.

Disconnecting audio boots

4. Press and hold the button on the front side

of the audio boot.

5. Gently remove the audio boot from the hearing

instrument.

Table of Contents

Thin tube