Doc 0155020 rev. C Table of contents Subject Page Description ..................... 3 Part List ......................4 Part List - HSG Parts..................5 CROS/BICROS System ................. 6 HI Dissembly ....................7 Amplifier ......................8 Replacement of Microphone & Receiver............9 Replacement of VC & TC ................10 Test........................11 Page 2 of 11...
Description Doc 0155020 rev. C Model Data Sheet SPARX SP90-VI 16499200 SPARX LITE SL90-VI 17141500 Available in Beige, Dark Brown, Cool Grey, Blue & Red Beige Brown Cool Grey Blue Page 3 of 11...
Part List Doc 0155020 rev. C Item Part No Item Part No AMPL COMPL (SPARX/SPARX LITE) 17188401 MIC. SUSPENSION 15297000 HI-PRO PROG. CABLE CS44, R 9022 907 69019 MICROPHONE 33M 15240900 HI-PRO PROG. CABLE CS44, L 9022 907 69029 MICROPHONE,COMPL...
Part List - HSG Parts Doc 0155020 rev. C HSG Parts For HI For HI For HI For HI For HI TRANSP SPARX & SPARX LITE BEIGE BROWN BLUE COOL GREY (optional) AU COVER,PTD 16429100 16429101 16429104 16429105 16429106 16429103...
CROS/BICROS System (4 contacts) Doc 0155020 rev. C Item Part No AUDIO-BOOT (for HI) 16987200 AUDIOBOOT,BICROS (for BICROS unit) 16987500 BICROS UNIT 16987600 CROS CABLE 20 CM 7000-409 CROS CABLE 22 CM 7000-439 CROS CABLE 24 CM 7000-469 CROS CABLE 26 CM 7000-459 CROS CABLE 28 CM 7000-479...
HI Disassembly Doc 0155020 rev. C Plastic bolts A pair of two plastic bolts Use a tweezer to separate Gently pull the two housing parts from holds on to the batt. door the two plastic bolts and pull each other them out.
Replacement of Rec & Mic Doc 0155020 rev. C Add rubber glue to fix the wires Connect wires and mount mic into suspension Route wires and make sure to place correctly in HSG The rec is delivered as rec Place Rec in front HSG. Solder Rec wires to amplifier and complete in box as shown route them well when adding HSG parts Page 9 of 11...
Replacement of TC & VC Doc 0155020 rev. C VC cover Place the VC into the VC cover Add the VC plate Mount VC to amplifier. Screw VC nut and solder the two VC terminals Add glue in the grove for TC. Place TC into the grove. Connect TC wires to PCB and route them as shown Page 10 of 11 Note: Apply coating material on solder pads after soldering...
Test Doc 0155020 rev. C Push up the test ring to fix the tube When testing the HI a test ring is Connect the CS44 prog cable and and hook needed to stabilize the HI. Place place the HI and 2cc coupler in the the test ring on the 2cc coupler fixture when placing it into the test tube...