Phonak Roger Clip-On Mic User Manual page 41

Most probable cause(s)
Roger Clip-On Mic's light is blinking red (single flash)
J Your Roger Clip-On Mic has
been connected to another
microphone which is no
longer available
The Roger Clip-On Mic's light is blinking red (double flash)
J Its battery charge is low
Roger Clip-On Mic has stopped working
J Software issue
Solution(s)
J Create a NewNet (press the
Connect button fro 7 seconds)
to make Roger Clip-On Mic a
standalone transmitter again
J Charge Roger Clip-On Mic as
soon as possible
J Reboot Roger Clip-On Mic by
simultaneously pressing it's
two buttons
41