Phonak Roger Clip-On Mic User Manual page 26

4. Using Roger Clip-On Mic
Hanging it around the neck
1. Open the lanyard by pulling the
magnets apart.
2. Hang the Roger Clip-On Mic
around the neck of the speaker
and close the lanyard.
3. Adjust the length of the
lanyard to bring Roger Clip-On
Mic closer to the mouth.
Secure the wire by pulling the
cable into the gap.
4. The distance between Roger
Clip-On Mic and the mouth
should not be more than
20 cm / 8 inches.
26
max. 20 cm /
8 inches