Phonak Roger Clip-On Mic User Manual page 21

4. The indicator light will turn green for two seconds to
confirm a successful connection.
5. Repeat steps 2 & 3 to connect a second receiver.
Depending on the receiver type, you may connect a
maximum of two Roger ear-level receivers OR one
Roger MyLink to your Roger Clip-On Mic.
Indicator light (connection status)
After pressing the Connect button, the following
feedback may be given by the indicator light:
Indicator light Meaning
Connection was successful – your Roger
receiver is connected to your Roger
Clip-On Mic.
Roger Clip-On Mic could not find a Roger
receiver. Move Roger Clip-On Mic closer
to your Roger receiver and make sure the
Roger receiver is powered. Then try to
connect again.
The Roger receiver is not compatible with
your Roger Clip-On Mic.
21