Troubleshooting; Reboot; Hard Reboot; Reset To Factory Values - Snom 720 User Manual

snom 720 User Manual
T
roubleshooting
R
eboot
1. Press .
2. Press 5 Maintenance.
3. Press 3 Reboot.
4. When asked whether to "Reboot?", press
5. Wait for the idle screen to reappear.
H
ard reboot
Disconnect the power, wait for a few seconds, and reconnect. Wait for the idle screen to reappear.
Warning: Never disconnect the power during a firmware update!
R
eset to factory values
1. Press .
2. Press 5 Maintenance.
3. Press 4 Reset values.
4. Enter the administrator password and press
5. Wait for the idle screen to reappear.
6. See "Initializing and registering the phone" on page 15 to continue.
Warning: All customized settings will be lost!
T
FTP Update
When there is no other way to get the phone to work (administrator password lost, etc.). How it is
done: See http://wiki.snom.com/Firmware/Update/TFTP_Update/en.
Warning: All customized settings will be lost!
M
anual initialization
When automatic initialization via DHCP fails, enter the values for netmask, IP gateway, and DNS server
manually after each prompt on the display.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
.
.
71

Troubleshooting