Camera System Adjustments; G-Cam Flip Adjustment - Sony Handycam CCD-TRV3E Service Manual

1-3. CAMERA SYSTEM ADJUSTMENTS

Before perform the camera system adjustments, Check that the
specified value of "28MHz Origin Oscillation Adjustment", "Y OUT
level Adjustment" and "C OUT level Adjustment" of "VIDEO
SYSTEM ADJUSTMENT" are satisfied.

1. G-CAM flip Adjustment

Set the color reproduction conditions to optimum.
Subject Color bar chart standard picture frame
Measurement Point Display data of page 1 of the adjusting
remote commander (Note 1)
Measuring Instrument
Adjustment Page F
Adjustment Address 21
Note 1. Displayed data of page 1 of the adjusting remote
commander.
1 : XX : XX
Note 2. [ ] : Except CCD-TRV3E/TRV13E/TRV23E
< > : CCD-TRV3E/TRV13E/TRV23E
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 03, and set data: 16.
3) Select page: F, address: 21, set data: [D2] <D0>, and press the
PAUSE button of the adjusting remote commander.
4) Select page 1 of the adjusting remote commander, and compare
the higher 2 digits (S1) and lower 2 digits (S2) of the 4-degits
display data.
When S1<S2
Perform steps 5) onwards.
When S1 S2
Perform steps "Processing after Completing Adjustments".
5) Select page: F, address: 21, set data: [52] <50>, and press the
PAUSE button of the adjusting remote commander.
Processing after Completing Adjustments
1) Select page: 0, address: 03, and set data: 00.
2) Select page: 0, address: 01, and set data: 00.
n S2
n S1
5-14