Xerox Phaser 3117 Service Manual page 71

11.Remove the halogen lamp from the heat roller by
pulling it out to the arrow direction.
Halogen Lamp
5.2.9 Engine Shield (Including Main PBA and SMPS)
1.Before Disassembling
-Separate the font cover.(Refer to 5.2)
-Separate the SMPS cover.(Refer to 5.3)
-Separate the Main cover.(Refer to 5.4)
x
Heat Roller
2.Disconnect all connectors except the connector
which connects the SMPS to the Main PBA.
Disassembly and Reassembly
Thermister
Clutch
Motor
LSU
HVPS
Fuser
Service Manual
5-11