Consumables And Replacement Parts; Led Status Error Messages - Xerox Phaser 3117 Service Manual

Alignment and Adjustments

4.3 Consumables and Replacement Parts

The cycle period outlined below is a general guideline for maintenance.
The example list is for an average usage of 50 transmitted and received documents per day.
Environmental conditions and actual use will vary these factors.
The cycle period given below is for reference only.
COMPONENT
Pick-up Roller
Transfer Roller
Fuser
Toner Cartridge
4.4 LED Status Error Message
ERROR
Open Fuser Error
Over Heat Error
Low Heat Error
LSU not Ready Error
(Pmotor Error)
LSU Not Ready Error
(HSYNC Error)
Service Manual
4-4
LED Status
The [Error] LED (red) and the [Toner Save] LED are simultaneously
flashing every one-second.
The [Error] LED (orange) and the [Toner Save] LED are
simultaneously flashing every one-second.
The [Error] LED (red) and the [Toner Save] LED are simultaneously
flashing every 4 seconds.
The [Error] LED (green) and the [Toner Save] LED are
simultaneously flashing every one-second.
The printing is stop in the fad status, and the [Error] LED (green) and
the [Toner Save] LED are simultaneously flashing every 4 seconds.
REPLACEMENT CYCLE
50,000 Pages
50,000 Pages
50,000 Pages
3,000 Pages(Sales), 1,000 Pages(Initial)
DCU CODE
60
68
62
95
96
x