Connection - Sony EVI-D80N Technical Manual

1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 26.
Notes
 You cannot connect your Color Video Camera to a
computer that is not equipped with either video input
or an S-Video input connector. You might not be able
to use your existing computer with your Color Video
Camera unless you provide the computer with a
video capture board and/or software. Consult your
computer dealer or manufacturer for details.
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Video cable
(not supplied)
to VIDEO
S-Video cable (not supplied)
to S VIDEO
VISCA cable (not supplied)
to VISCA IN
to VISCA OUT
to VISCA RS-422 2)
to DC 12V
 Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
 Do not make VISCA RS-232C and RS-422
connections at the same time, as this may cause
malfunctions.

Connection

to Video
input
to S-Video
input
1)
to RS-232C
To VISCA IN of other
EVI-D80N/D80P/ Computer, TV or VCR
D90N/D90P (when
with a video input
connecting to more
jack
than one camera)
AC power adaptor
(supplied)
Power cord (supplied)
Polarity of the plug
to AC outlet
4