Connection - Sony SRG-300H Technical Manual

1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 56.
3) For details on the VISCA over IP connection using LAN cable, see page 29.
Notes
 Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
HDMI cable (not supplied)
to HDMI VIDEO
VISCA cable (not supplied)
to VISCA RS-232 IN
to VISCA RS-232 OUT To VISCA IN of other
LAN cable (not supplied)
to LAN
to VISCA RS-422
to 12V

Connection

to HDMI input
1)
to RS-232
SRG series (when
connecting to more
than one camera)
Computer with LAN or
to LAN serial communication
interface, HD video
monitor with HDMI
input interface, etc.
2)
AC power adaptor (supplied)
Power cord (supplied)
 You have to set the video format of the signal to be
output from the camera. For detailed information on
how to set the video format, see " SYSTEM
SELECT switch" on page 8.
 Do not make VISCA RS-232 and RS-422 connections
at the same time, as this may cause malfunctions.
to AC outlet