Sony EVI-D80N Technical Manual page 13

Slow shutter – Auto/Manual
When set to "Auto, " ensures that the slow shutter is set
automatically when the brightness drops. Effective
only when the AE mode is set to "Full Auto. "
Set to "Slow Shutter Manual" at shipment.
Note
The Slow Shutter Auto function is not available in WD
mode
ICR (IR Cut-Removable) Mode (EVI-D90N/P
only)
An infrared (IR) Cut-Filter can be disengaged from the
image path for increased sensitivity in low light
environments. The ICR will automatically engage
depending on the ambient light, allowing the camera to
be effective in day/night environments.
When the auto ICR mode is set to ON, the image
becomes black and white.
Auto ICR Mode (EVI-D90N/P only)
Auto ICR Mode automatically switches the settings
needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is
automatically disabled (ICR ON), and the infrared
sensitivity is increased. With a set level of brightness,
the IR Cut Filter is automatically enabled (ICR OFF).
Also, on systems equipped with an IR light, the
internal data of the camera is used to make the proper
decisions to avoid malfunctions.
Auto ICR Mode operates with the AE Full Auto
setting.
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
When Auto Slow Shutter is OFF (initial setting)
AGC IRIS
ICR
MAX OPEN
GAIN
ICR ON
Dark
ICR OFF ON
When Auto Slow Shutter is ON
Note
When in Auto_ICR_OFF state and WB data is added
(default), a malfunction may occur when the subjects
largely consisting of blue and green colors are taken.
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside
the camera, data will be saved regardless of whether it
has been backed up.
Effect
It consists of the following functions.
• Neg. Art: Negative/Positive Reversal
• Black White: Monochrome Image
Basic Functions
Shutter 1/60 sec
IRIS
SHUTTER
Bright
13