Minimizing Picture Degradation While Editing - JVC HR-J270EK Instructions Manual

Minimizing
Picture
Degradation
While Editing
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
1
MENU
– –:– –
2 3
2
5 6
8 9
4
0
?
OK
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Move the highlighted bar (pointer) to "MODE SET" by
pressing %fi, then press OK or
SELECT PICTURE
CONTROL SET MODE
3
Move the highlighted bar
(pointer) to "PICTURE
CONTROL" by pressing
%fi, then press OK or
select the desired mode.
AUTO: Provides
optimised picture
benefits of B.E.S.T.
Picture System.
Normally select
"AUTO".
EDIT: Minimizes picture degradation during editing
(recording and playback).
SOFT: Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SHARP: Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces
such as cartoons.
NOTES:
When you select "EDIT", "SOFT" or "SHARP", the
selected mode will not change until you select again.
When you select "EDIT" to dub tapes, be sure to
select "AUTO" after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When "B.E.S.T." is "OFF", "PICTURE CONTROL" switches
automatically from "AUTO" to "NORM".
Select "EDIT" when you are dubbing tapes. Refer to page 30
or 31.
29
#
.
MODE SET
B. E. S. T.
PICTURE CONTROL AUTO
#
to
AUTO TIMER
O. S. D.
DIRECT REC
AUTO SP=LP TIMER
POWER SAVE
NEXT PAGE
[5∞] =
[MENU] : EXIT
ON
OFF
ON
ON
OFF
OFF