Picture Control; Minimizing Picture Degradation While Editing - JVC HR-S9700EK Instruction Manual

Jvc video cassette recorder instruction manual
Hide thumbs Also See for HR-S9700EK:
Table of Contents

Advertisement

Minimizing
Picture
Degradation
While Editing
Turn on the TV and select the VIDEO channel (or AV mode).
1
2
1
4
7
1
2
Advantages Of S-VHS
Video Recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
– –:– –
2
3
5
6
3
4
8
9
4
MENU
0
3
OK

Picture Control

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Move the highlighted bar (pointer) to "MODE SET" by
pressing %fi, then press OK or
SELECT PICTURE
CONTROL SET MODE
3
Move the highlighted bar
(pointer) to "PICTURE
CONTROL" by pressing
%fi, then press OK or
select the desired mode.
AUTO: Provides
optimised picture
benefits of B.E.S.T.
Picture System.
Normally select
"AUTO".
EDIT:
Minimizes picture degradation during editing
(recording and playback).
SOFT: Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SHARP: Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces
such as cartoons.
NOTES:
When you select "EDIT", "SOFT" or "SHARP", the
selected mode will not change until you select again.
When you select "EDIT" to dub tapes, be sure to
select "AUTO" after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When "B.E.S.T." is "OFF", "PICTURE CONTROL" switches
automatically from "AUTO" to "NORM".
Select "EDIT" when you are dubbing tapes. Refer to page 48,
49 or 50.
47
#
.
MODE SET
B. E. S. T.
PICTURE CONTROL
AUTO
#
to
AUTO TIMER
O. S. D.
DIRECT REC
AUTO SP=LP TIMER
DIGITAL 3R
NEXT PAGE
[5∞] =
[MENU] : EXIT
ON
OFF
ON
ON
OFF
ON

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpt0320-001bHr-s9700euHr-s9700ms

Table of Contents