Recording - JVC HR-J270EK Instructions Manual

14

Recording

Turn on the TV and select the VIDEO channel (or AV mode).
TV/VCR
1
2
4
NUMBER
7
1
4,5
PLAY
4
RECORD
6
INFORMATION
When using the AV connection (
between TV mode and AV mode by pressing TV/VCR.
* Depending on the type of TV used, TV/VCR button does
not function as described above.
Recording Resume Function
If there is a power outage during recording (or Instant
Timer Recording or timer recording), the recording will
resume automatically when power is restored to the
recorder unless the recorder's memory backup has expired.
5
3
1
2
4
6
– –:– –
2 3
2
5 6
8 9
4
0
PR+/–
3
?
SP/LP
PAUSE
pg. 5), you can switch
BASIC OPERATIONS (cont.)
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact (See
below).
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press PR +/– or the NUMBER keys to select the preset
you wish to record.
SET TAPE SPEED
3
Press SP/LP (
recorder display panel to confirm the selected tape
speed.
5
Picture quality of LP recordings will not be as high as
on SP recordings.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
If "DIRECT REC" is set to "ON", the programme
that appears on the TV screen will be recorded
(
You can not change the preset whilst recording is in
2
progress. To change the preset, see step 5.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
5
During the Record Pause mode, you can change the
preset by pressing the PR +/– buttons or the NUMBER
keys.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
). Check the SP/LP indicator on the
pg. 22).
pg. 9).
Record safety tab