Automatic Satellite Programme Recording - JVC HR-J270EK Instructions Manual

26
Automatic Satellite
Programme Recording
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver;
the recorder starts recording when the signals input from the satellite receiver to the AV2 (L-2) IN/DECODER connector, and when
there is no input signals the recorder stops recording and the power shuts off.
Satellite Receiver Unit
DECODER
Mains outlet
Back of Recorder
IMPORTANT
When you set "L-2 SELECT" to "SAT" (
the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the
VCR indicator on the display panel.
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video
mode.
NOTE:
Refer to the instructions supplied with your satellite receiver.
Outdoor Unit
Satellite Cable
VCR TV
L-2
( )
ENTREE/DECODEUR
AV2
IN/DECODER
pg. 32), it is possible to view a satellite broadcast with the TV set to its AV mode even if
ADVANCED OPERATIONS (cont.)
21-pin AV input
Aerial
connector (SCART)
TV Aerial cable
ANT. IN
RF OUT
ENTREE
CONTROLEUR SAT
ANT. IN
SORTIE
SAT CONTROL
OUT
L-1
( )
ENTREE/SORTIE
ANTENNE
AV1
R
IN/OUT
SORTIE
RF OUT
AUDIO
L
Aerial
connector
Back of TV
EXT.2 EXT.1