Video; Edit From A Camcorder - JVC HR-J270EK Instructions Manual

30
Edit From
A Camcorder
1
4
7
AUX
1
NOTES:
All necessary cables can be obtained from your dealer.
You can also use another video recorder as the player instead
of a camcorder.
When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
Recorder (HR-J670/672EK)

VIDEO

input
Camcorder
Player
– –:– –
2 3
2
5 6
8 9
4
0
PR
?
AUDIO input
Audio/Video Cable
VIDEO OUT
(not provided)
AUDIO OUT
ADVANCED OPERATIONS (cont.)
You can use a camcorder as the source player and your video
recorder as the recorder.
MAKE CONNECTIONS
1
With HR-J670/672EK, connect the camcorder's
AUDIO/VIDEO OUT connectors to the recorder's front
panel AUDIO/VIDEO input connectors.
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
With HR-J470/270EK, connect the camcorder's
AUDIO/VIDEO OUT connectors to the recorder's rear
panel AV2 (L-2) IN/DECODER or AV1 (L-1) IN/OUT
connector via an optional cable adapter.
SET RECORDER'S INPUT
MODE
2
With HR-J670/672EK, press AUX and/or PR so that
"F-1" appears in place of a preset position number.
With HR-J470/270EK, press AUX and/or PR to select
"L-1" for the AV1 (L-1) IN/OUT connector, or "L-2" for
the AV2 (L-2) IN/DECODER connector, depending on
the connector being used.
SET EDIT MODE
3
See "Picture Control" on page 29.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
Recorder (HR-J470/270EK)
VIDEO OUT
Camcorder
AUDIO OUT
Player
Cable adapter
(not provided)
Audio/Video Cable
(not provided)