Delete A Channel - JVC HR-J270EK Instructions Manual

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
SELECT ITEM
1 @ #
Press %fi
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
When Receiving A
Scrambled Broadcast
SELECT DECODER MODE
1
Set "L-2 SELECT" to "DECODER" (
ACCESS CONFIRMATION
SCREEN
2
Perform steps 1 and 2 of "Storing Channel Manually" on
page 44.
SELECT POSITION
3
@ #
Press % fi
to select the channel position broadcast-
ing scrambled programmes, then press OK twice.
CHANGE DECODER SETTING
4
#
Press until "OFF" (decoder setting) begins blinking,
and set it to "ON" by pressing % fi.
RETURN TO CONFIRMATION
SCREEN
5
Press OK.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
NOTE:
Scrambled programmes are not currently broadcast in the U.K.
Change Station Preset
Position
1
2
pg. 32).
3
Fine-Tuning Channels
Already Stored
1
2
3
4
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
SELECT ITEM
@ #
Press %fi
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
@ #
Press %fi
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
PR CH ID PR CH
01 26 BBC1 08
02 23 ITV 09
03 30 CH4 10
04 33 BBC2 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
Press MENU.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
@ #
Press %fi
until the channel you want to tune begins
blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
#
until "+/–" begins blinking, then press %fi until
Press
the picture is clearest. Then press OK.
The Confirmation screen appears.
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
Press MENU.
45
ID
PR CH ID PR CH
––––
01 26 BBC1 08
––––
02 33 BBC2 09
––––
03 23 ITV 10
––––
04 30 CH4 11
––––
05 37 CH5 12
––––
06 –––– 13
––––
07 –––– 14
[ 5 ∞ ] : MOVE =
[MENU] : EXIT
ID
––––
––––
––––
––––
––––
––––
––––