Timer Warning - JVC HR-J268EU Instructions Manual

1
4
7
VPS/PDC
STOP+/–
PROG
1
Satellite Tuner Users
To timer-record a satellite broadcast using S
1 Set "AV2 SELECT" to "AV2" (
2 Perform steps 1 – 7.
3 Set the satellite tuner to the appropriate channel before
the selected programme begins.
4 Leave the satellite tuner's power on.
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the S
entered has not been set.
Press the NUMBER keys or %fi to input the channel
position number on which your recorder receives that
station, then press OK or
number. The S V
HOW IEW
GUIDE PROG SET
GUIDE PROG TV PROG
2 – –
[5 ∞ ] =
[PROG] : EXIT
2 3
2
5 6
WEEKLY
8 9
0
4
?
OK
V :
HOW IEW
pg. 31).
V number you
HOW IEW
#
to set the Guide Program
program screen appears.
(Ex.) To timer-record a ZDF
programme with S V
HOW
* If your recorder receives
ZDF on the channel
position 2, press OK or
after entering "2".
SET TAPE SPEED (HR-J468EU ONLY)
4
Press SP/LP (
SET VPS/PDC MODE
5
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS/PDC is set to ON.
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS/PDC is set to OFF.
"VPS/PDC Recording" on page 25.
RETURN TO NORMAL SCREEN
6
Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER'S TIMER MODE
7
Press ‰ (TIMER). The recorder turns off automatically
and ‰ appears on the display panel.
To disengage the timer, press ‰ (TIMER) again.
NOTES:
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
It is not possible to timer-record a TV programme with a
S V number which starts with "0".
HOW IEW

Timer Warning

If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning
appears on screen to tell you
that the recording is to start in
5 minutes.
NOTES:
The warning only appears if
you're not in the Timer mode at that time.
If this recorder is being used as the player for tape
dubbing, the warning screen is recorded on the tape in
.
IEW
the other video recorder.
The warning blinks for the entire 5 minutes leading up to
#
the start of timer recording. To clear the display, press
EN
) to set the tape speed.
pg. 26).
– WARNING–
TIMER RECORDING
TO START SOON
[ ]
23
.