Recording; First Recording; Basic Recording - JVC HR-J268EU Instructions Manual

RECORDING

Basic
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
NUMBER
7
SP/LP
1
RECORD
The PLAY, RECORD and PAUSE buttons on the recorder
have the same functions as those on the remote control.
Recording Resume Function
If there is a power outage during recording (or Instant
Timer Recording or timer recording), the recording will
resume automatically when power is restored to the
recorder unless the recorder's memory backup has expired.
2 3
2
5 6
8 9
0
4
TV PROG
?
PLAY
PAUSE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
SET TAPE SPEED
(HR-J468EU ONLY)
3
Press SP/LP ( ). Check the SP/LP indicator on the
recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
With HR-J468EU:
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette ( pg. 20).
With HR-J311/268EU:
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette (
If "DIRECT REC" is set to "ON", the programme
that appears on the TV screen will be recorded
( pg. 11).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
17
EN
pg. 20).
Record safety tab