Auto Pan Setup And Activation; To Set The Points Of Auto Pan; To Activate Auto Pan - LG LCC-K1000 Owner's Manual

LCC-K1000_AABBLLG_ENG

Auto Pan Setup and Activation

You will set up and activate the auto pan function.
The camera can pan among the points you will set.
Note: Refer to the operating instructions of camera
for details on the auto pan function.

To set the points of auto pan

1. Press the Set Up button then select the [AUTO
PANNING] icon.
AUTO PANNING
2. Press SEL.
The sub menu will appear for [AUTO PANNING]
setting.
3. Select [Set Auto Panning] option then press SEL.
The sub menu will appear.
Set Auto Panning
Run Auto Panning
PTZ
000
[A-Pan No.#
Speed
PTZ
Park Time :
000
4. Press the PTZ1 or PTZ2 button then use number
buttons to select a camera's number, if required.
5. By moving the joystick, move the camera to a
point you wish.
6. Press NUM button then enter a [Speed] (0-127) to
move to the preset position. Then press SEL.
7. Press NUM button then enter a [Park Time] (hold-
ing time) at the preset position (0-255).
The setting is finished and the setting is memo-
rized to the camera's memory.
8. Repeat steps 4-7 to add additional position.
8/9/05 2:55 PM Page 17
000 PTZ
[vV:bB]
1]
: 50
2
[vV]

To activate auto pan

1. Press the Set Up button then select the [AUTO
PANNING] icon.
AUTO PANNING
2. Press SEL.
The sub menu will appear for [AUTO PANNING]
setting.
3. Select [Run Auto Panning] option then press SEL.
The sub menu will appear.
Set Auto Panning
Run Auto Panning
PTZ
000
[Run Auto Panning]
Are you sure?
PTZ
000
4. Press SEL to activate auto pan.
000 PTZ
[vV:bB]
: OK
SEL
17