Privacy Setup; To Register A New Privacy Zone; To Display Or Disappear Privacy Zone - LG LCC-K1000 Owner's Manual

LCC-K1000_AABBLLG_ENG

Privacy Setup

This setting is used for masking unwanted zones,
hiding them from display on the monitor screen.
Up to 8 zones can be registered. Submenus are pro-
vided for zone number selection and parameter set-
ting.

To register a new privacy zone

1. Press the Set Up button then select the [PRIVACY
ZONE] icon.
PRIVACY ZONE
2. Press SEL.
The sub menu will appear for [PRIVACY ZONE]
setting.
3. Select [Set Zone Area] option then press SEL.
The sub menu will appear.
Set Zone Area
Display Zone Area
PTZ
000
[Set Privacy Zone]
Zone Index : ---
PTZ
(1 ~ 8)
000
4. Press the PTZ1 or PTZ2 button then use number
buttons to select a camera's number, if required.
5. Press SEL.
6. Use number buttons to select the zone index num-
ber then press SEL to confirm.
The zone frame appears on the monitor.
7. Adjust the pan, tilt, and zoom position so that the
desired position comes into the zone frame with
the joystick.
8. Press SEL.
The privacy zone setting has been completed and
the setting is memorized in the camera's memory.
9. Repeat steps 3-8 to add additional position.
8/9/05 2:55 PM Page 19
000 PTZ
[vV:bB]
[Num]

To display or disappear privacy zone

1. Press the Set Up button then select the [PRIVACY
ZONE] icon.
PRIVACY ZONE
2. Press SEL.
The sub menu will appear for [PRIVACY ZONE]
setting.
3. Select [Display Zone Area] option then press SEL.
The sub menu will appear.
Set Zone Area
Display Zone Area
PTZ
000
Display
Zone Index
PTZ
(1~8)
000
<4:OFF , 6:ON>
4. Use 4 (ON) or 6 (OFF) buttons to select Alarm
Input Mode then press SEL.
ON: Preset privacy zones are veiled on the moni-
tor screen.
OFF: The veiling function does not work.
5. Enter a [Zone Index] number (1-8).
The display zone setting has been completed and
the setting is memorized to the camera's memory.
6. Repeat steps 4-5 to set additional zone.
000 PTZ
[vV:bB]
: OFF
: - - -
[Num]
19