Appendix; Maintenance - Icy Box IB-MP3012 series Manual

http://www.icybox.de
IB-MP3012 series
Media Player and DTV Receiver

7. aPPenDIX

7.1 Maintenance

7.1.1 Reset the device
You can press "MENU" to open the setup menu. To Reset the device, navigate to Setup menu and select "Restore Default"
and press "ENTER". Please refer to setup section for the details.
7.1.2 Power on/Standby time
The device needs sometime to power on. The time costs are listed below.
Plug in the power -> power on and ready to use: it takes about 18 seconds.
Power on status -> Standby mode by pressing the power button: it takes about 8 seconds.
Standby mode -> power on mode by pressing the power button: it takes about 8 seconds.
In this short time, the remote control unit and the power button are not functional.
7.1.3 Battery
When the distance of remote control is dropped dramatically, please replace the new battery for the remote control.
7.1.4 Black screen
If you get black screen while starting to play Movie or Photo files, please check the connection from TV to the device
and the resolution. For YPbPr, the maximum resolution is 1080i. Press "resolution" key to change the resolution until the
screen displays. For HDMI connection, select "HDMI Auto" to detect the resolution of TV set automatically. For CVBS, it
always output SD 480i/576i so you can change to CVBS to check the setting of player.
7.1.5 Can't use Thumbnail function
Check the tab in the top. The thumbnail function can only be toggled under "Photo" tab. The second point is to make sure
to enter the folder and browse the photo files, and then press the yellow key for thumbnail view.
If browsing photos through UPnP function, the thumbnail function can't be enabled. Please try to use Network player
function to browse the photos.
7.1.6 Can't see subtitle through UPnP playback
The file of subtitle isn't supported by UPnP media server, and therefore the external subtitle file can't be loaded while wat-
ching video though UPnP function. Please try to use Network player function to play video with subtitle file.
7.1.7 Smooth playback through Ethernet/Wireless LAN
For the Ethernet connection, check if use at least 10/100 Mbps Ethernet switching Hub and the 10/100 Ethernet adapter
on PC.
For Wi-Fi Dongle, we recommend using Infrastructure (AP) mode and "NO" or "WPA/WPA2-PSK_AES" for the maximum
data rate. In the other mode such as encrypted with WEP, TKIP algorithm, or use Ad Hoc as the radio mode, the data rate
is only up to 54 Mbps (802.11 g).
7.1.8 TV Overscan issue
Some video can't be watched as full frame on TV set. The edges on the both sides may be outside the TV screen. In such
case, press the Zoom "-" key to zoom out the video to fit the screen.
7.1.9 Video frame scrambled while playing DVD Video
If you see scrambling video when playing DVD Video through USB external DVD-ROM on the player, you may be playing
the CSS-protected original DVD Video. This player can't play CSS-protected DVD Video. Please try to play un-protected
DVD Video.
35